![background image](http://html1.mh-extra.com/html/insportline/sportline-eg-7820/sportline-eg-7820_user-manual_2068987026.webp)
d. “ENTER” button: Press the “ENTER” button for confirming and entering the function value setting.
e.
“UP” or “DOWN” button: Press the “UP” or “DOWN” button to choose P12 as the following
illustration shown.
f.
“ENTER” button: Press the “ENTER” button to enter Program 12.
g. “UP” or “DOWN” button: Press the “UP” or “DOWN” button to choose the desired Watt Control
value (40 ~ 400 Watt; 10 Watt increment.)
h. “ENTER” button: To continue selecting other function values, press the “ENTER” button.
NOTE:
The console will cycle through the functions as follow and allow users to set the function
values.
TIME (01:00 to 99:00; 1minute increment)
DISTANCE (0.1 to 99.9km; 0.1km increment)
CALORIES (10 to 990 Kcal; 10 Kcal Increment)
PULSE (70 to 240 BPM; 1BPM increment)
Press the “ENTER” button to confirm the function value and enter the next function value
setting.
To increase or decrease the value of the function (“TIME”, “DISTANCE”, “CALORIES”,
“PULSE”) press the “UP” or “DOWN” button.
To reset the function value to zero, press the “RESET” button.
i.
START/PAUSE” button: After setting up all the function values, press the START/PAUSE” button to
start a workout.
Under PAUSE or START mode, the user could press the “UP” or “DOWN” button to adjust the desired
Watt value (40 ~ 400Watt.)
WITHOUT PULSE VALUE:
“
” flashing symbol will appear when detecting your pulse.
THE WARNING BEEP SOUND EMIT CONSTANLY DURING WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE during workout, the short
warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to decrease the workload level.
USER MODE
There are three ways to enter into USER MODE as below:
1. POWER OFF STATUS (LCD diagram disappear on LCD window):
a.
Pedaling to activate the console.
b. The activated LCD console lights up along with a long beep sound. LCD diagram appears as shown
below:
26