STEP 9: Console Battery Assembly
a.
Loosen the Screw (M3x10mm) (95) at the bottom on the console by using the combination wrench to
open the Battery Door (42).
b. The Console (41) operates with FOUR AA rechargeable batteries, four batteries are included in the
hardware box.
CAUTION: The machine is suitable for Nickel-Metal Hybird / NI-MH rechargeable batteries only.
To prevent from any damages, general or other type of batteries are not allowed to use.
c.
Install rechargeable batteries into the Console (41).
Make sure the location of positive or negative battery terminal is correct.
d. Attach the Battery Door (42) onto the back of the Console (41) and secure with the Screw (M3x10mm)
(95).
STEP 10: Wire Connection
a.
Connect the Upper Pulse Sensor Wire (134) to the Middle Pulse Sensor Wire (135).
b. Connect the Upper Connection Wire (130) to the Middle Connection Wire (131).
NOTE: The number of wire pin should be the same for both wires to connect with as the following
illustration shown.
13
