Inovance MD380 Series, User Manual

Page: 187 / 304

MD380 User Manual Desc
ription of Function Codes
- 187 -
Function
Code
Parameter
Name
Setting Range Default
F7-05
LED
display stop
parameters
0000–FFFF
7 6 5 4 3 2 1 0
Bus voltage (V)
'2VWDWH
AI1 voltage (V)
Count value
Frequency reference (Hz)
DI state
AI2 voltage (V)
AI3 voltage (V)
15 14 12 11 10 9 8
PLC stage
Pulse reference (kHz)
Length value
Reserved
13
Load speed
PID reference
Reserved
Reserved
If a parameter needs to be displayed during the
running, set the corresponding bit to 1, and set F7-05
to the hexadecimal equivalent of this binary number.
0
Function Code Parameter Name Setting Range Default
F7-06
/RDGVSHHGGLVSOD\FRHI¿FLHQW
0.0001–6.5000 1.0000
This parameter is used to adjust the relationship between the output frequency of the AC
drive and the load speed. For details, see the description of F7-12.
Function Code Parameter Name Setting Range Default
F7-07 Heatsink temperature of inverter module 0.0–100.0
e
C -
It is used to display the insulated gate bipolar transistor (IGBT) temperature of the inverter
module, and the IGBT overheat protection value of the inverter module depends on the
model.
Function Code Parameter Name Setting Range Default
F7-08
Product SN
0.0–100.0
e
C -
IIt is used to display the temporary software version of the control board.
Function Code Parameter Name Setting Range Default
F7-09 Accumulative running time 0–65535 h -
It is used to display the accumulative running time of the AC drive. After the accumulative
running time reaches the value set in F8-17, the terminal with the digital output function 12
EHFRPHV21
efesotomasyon.com