Inovance MD380 Series, User Manual

Page: 197 / 304

MD380 User Manual Desc
ription of Function Codes
- 197 -
Figure 6-24 Any current reaching detection
2))
2))
2))
21 21 21
2XWSXW
current
Any current
reaching
Any current reaching
detection signal
'2RUUHOD\
Any current reaching amplitude
Any current reaching amplitude
Function Code Parameter Name Setting Range Default
F8-42 Timing function
0: Disabled
1: Enabled
0
F8-43 Timing duration source
0: F8-44
1: AI1
2: AI2
3: AI3
(100% of analog input corresponds
to the value of F8-44)
0
F8-44 Timing duration 0.0–6500.0 min 0.0 min
These parameters are used to implement the AC drive timing function.
,I)LVVHWWRWKH$&GULYHVWDUWVWRWLPHDWVWDUWXS:KHQWKHVHWWLPLQJGXUDWLRQLV
UHDFKHGWKH$&GULYHVWRSVDXWRPDWLFDOO\DQGPHDQZKLOHWKHFRUUHVSRQGLQJ'2EHFRPHV
21
The AC drive starts timing from 0 each time it starts up and the remaining timing duration
FDQEHTXHULHGE\8
The timing duration is set in F8-43 and F8-44, in unit of minute.
Function Code Parameter Name Setting Range Default
F8-45 AI1 input voltage lower limit 0.00 V to F8-46 3.10 V
F8-46 AI1 input voltage upper limit F8-45 to 10.00 V 6.80 V
These two parameters are used to set the limits of the input voltage to provide protection on
WKH$&GULYH:KHQWKH$,LQSXWLVODUJHUWKDQWKHYDOXHRI)RUVPDOOHUWKDQWKHYDOXH
RI)WKHFRUUHVSRQGLQJ'2EHFRPHV21LQGLFDWLQJWKDW$,LQSXWH[FHHGVWKHOLPLW
Function Code Parameter Name Setting Range Default
F8-47 Module temperature threshold 0–75 °C 75 °C
:KHQWKHKHDWVLQNWHPSHUDWXUHRIWKH$&GULYHUHDFKHVWKHYDOXHRIWKLVSDUDPHWHUWKH
FRUUHVSRQGLQJ '2 EHFRPHV 21 LQGLFDWLQJ WKDW WKH PRGXOH WHPSHUDWXUH UHDFKHV WKH
threshold.
efesotomasyon.com