INOVA AUTOMATION
NICE Series Integrated Elevator Solution
–
N Quick Start-Up Guide V1.0
55
F6-68
Fire emergency
function selection
0
–
65535
Bit0: Reserved
Bit1: Reserved
Bit2: Reserved
Bit3: Arrival gong output in inspection or fire emergency state
Bit4: To enable Multiple car calls registered in fire emergency
state
Bit5: Retentive at power failure in fire emergency state - In the
fire emergency state, the current system and car state will be
memorized at power failure and be resumed after the system
is powered on again
Bit6: Closing door by holding down the door close button
Bit7: Reserved
Bi8: Reserved
Bit9: Displaying hall calls in fire emergency state
Bit10: Reserved
Bit11: Exiting fire emergency only after arrives at fire
emergency floor
Bit12: Not clearing car calls at reverse door open in fire fighter
running state
Bit13: Reserved
Bit14: Opening door by holding down the door open button
Bit15: Automatic door open in fire emergency floor
00000
b00 0
b01 0
b02 0
b03 0
b04 0
b05 0
b06 0
b07 0
b08 0
b09 0
b10 0
b11 0
b12 0
b13 0
b14 0
b15 0
-
F6-69
Emergency evacuation
function selection
0
–
65535
Bit0:0, Bit1:0 for Auto direction detection
Bit0:1, Bit1:0 for Light load/Load weigh input based direction
detection
Bit0:0, Bit1:1 for Nearest floor direction running
Bit2: Stopping at evacuation parking floor set in F6-73
Bit3: Compensation at start up
–
no load cell start up is still
valid in the process of evacuation running
Bit4: Reserved
Bit5: Reserved
Bit6: Reserved
Bit7: Reserved
Bit8: Emergency running time protection - If the elevator does
not arrive at the required floor after 50s emergency
evacuation running time, Err33 is reported.
In this case, the function of switching over shorting stator
braking mode to controller drive based on the time setting
cannot be implemented
Bit9: Reserved
Bit10: Buzzer tweets at intervals in the emergency evacuation
running state
Bit11: Reserved
00000
b00 0
b01 0
b02 0
b03 0
b04 0
b05 0
b06 0
b07 0
b08 0
b09 0
b10 0
b11 0
b12 0
b13 0
b14 0
b15 0
-