Chapter 3: Using the display and keypad
TT 98-123789-D
41
Status information
Status information in the display is normally shown in the lower line of the Main screen.
Examples of status information are:
READY
,
REGISTERING
and
DATA
.
Displaying ongoing transmission
The display shows information on type and duration/MB for calls and data sessions in progress.
•
A 64 K Streaming session is displayed as
64K
followed by the duration,
•
a CS call is displayed as
CALL
followed by the duration and
•
Backgound data is displayed as
DATA
followed by MB.
Two lines are available in the display. If more than two calls or sessions are active, display of
Streaming data has the highest priority, then CS calls and then Background data. Within these
categories, the oldest calls/data sessions have the highest priority.
Request for action
A request for action, if it is not an alarm, is shown in the lower line of the display. This could be
e.g.
INSERT SIM
or
ENTER PIN
.
When the text is a question, press
OK
to accept.
What’s next?
This chapter has explained how to navigate in the display menu system and how to use it for basic
setup of the EXPLORER 527.
The following chapter, Using the interfaces, explains in detail how to set up and use each interface
of the EXPLORER 527.
WARNING!
When the EXPLORER 527 is powered on, stay clear of the antenna top
and sides! The antenna emits radio frequency energy,
not only
when a call or data
session is in progress. Always keep a minimum distance of 1 m from the antenna top
and sides when the system is powered.
