Chapter 3: Using the display and keypad
TT 98-123789-D
34
Calls menu
To see a list of calls or data sessions, do as follows:
1.
Select
CALLS
.
2.
Select one of the following:
•
MISSED
to see a list of incoming calls that were not answered.
•
RECEIVED
to see a list of incoming calls that were answered.
•
OUTGOING
to see a list of outgoing calls or data sessions.
3.
Select a call from the list to see details such as time, date and phone number.
If there was an error, the call log shows the cause of the error when possible.
When there are more than 100 calls in the list, the oldest calls are automatically deleted to make
room for new calls.
If you need to preserve the call log, you can export it to a file using the built-in web interface. For
further information, see Exporting the call log on page 68.
Settings menu
Selecting the preferred satellite
By default the EXPLORER 527 is set up to automatically find the most appropriate satellite to
connect to. However, if you are located in an area with coverage from more than one BGAN
satellite, you can select the satellite you prefer to use. Do as follows:
1.
Select
SETTINGS > SATELLITE
2.
Select one of the following:
•
IOR
to use the Indian Ocean Region satellite.
•
AOR
to use the Atlantic Ocean Region satellite.
•
POR
to use the Pacific Ocean Region satellite. Note that at this writing the POR satellite is
not yet available.
•
AUTO
to automatically use the most appropriate satellite (the default setting).
Note
If you have selected one of the satellites, the EXPLORER 527 will
only
try to establish a
connection to the selected satellite. This means that if the antenna is outside the
coverage area for that satellite, the EXPLORER 527 will not be able to register with the
BGAN network.
