Chapter 5: Using the web interface
TT 98-123789-D
Administration
105
Defining filters for the Traffic Flow Template
To define the filters used in the Traffic flow template, do as follows:
1.
From the left navigation pane, select
ADMINISTRATION
>
Traffic Flow Templates
>
Traffic flow filters
.
Then fill in the details for each traffic flow filter as described below.
2.
Type in an Evaluation Precedence Index in the
Eval.Prec. Index
column.
3.
Fill in one or more of the following fields to define the filter.
The allowed ranges appear in hover text when you pass the mouse over the fields.
•
Source address
+
Subnet mask
.
•
Protocol number
.
•
Destination port range
(From and To). Note that Source and Destination are relative the
core network. This means that Destination is your EXPLORER 527 terminal.
•
Source port range
(From and To).
•
Type of Service
+
Type of Service mask
.
For further information on the principles and parameters of the Traffic Flow Template, refer to
the 3GPP standards TS27.007 V4.2.0 and TS 23.060 V4.7.0.
4.
Click
Apply
at the bottom of the window.
The new settings are included if you select the filter in the Traffic flow template window.
Note
This field is mandatory. Each filter must have a different Evaluation Precedence
Index.
