About this manual
TT 98-123789-D
iv
About this manual
2
Intended readers
This manual is a user manual for the EXPLORER 527. The readers of the manual include anyone who is using
or intends to use the EXPLORER 527. No specific skills are required to operate the EXPLORER 527. However, it
is important that you observe all safety requirements listed in the Safety summary in the beginning of this
manual, and operate the EXPLORER 527 according to the guidelines in this manual.
Manual overview
This manual may not always reflect the latest software functionality of your EXPLORER 527. To obtain the
latest version of the manual, please enter the Thrane & Thrane Extranet and download the latest version, or
acquire it from your distributor.
This manual has the following chapters:
•
Introduction
contains an overview of the BGAN services and a brief description of the system.
•
Getting started
explains how to insert SIM card, install the EXPLORER 527 and antenna, connect cables,
start up the unit and enter the PIN. It also contains a short guide to making the first call.
•
Using the display and keypad
contains an overview of the display menu system and explains how to use
the menus.
•
Using the interfaces
goes through the basic setup and use of each interface.
•
Using the web interface
explains how to use the built-in web interface of the EXPLORER 527, and
describes the available menus and settings. It also explains advanced setup of interfaces.
•
Maintenance and troubleshooting
contains a short troubleshooting guide and explains how to update
software. It also describes and lists the alarm messages that may appear in the handset, and gives
information on where to get further help if necessary.
Typography
In this manual, typography is used as indicated below:
Bold
is used for the following purposes:
•
To emphasize words.
Example: “Enabling stealth mode will
not put the EXPLORER 527 into stealth mode
, it only enables the
use of stealth mode”.
•
To indicate what the user should select in the user interface.
Example: “Select
SETTINGS
>
LAN
and click
Enabled
”.
Italic
is used to emphasize the paragraph title in cross-references.
Example: “For further information, see Connecting Cables on page...”.
COURIER
is used for the following purposes:
•
To indicate text appearing in the display.
Example: “the Main screen shows
READY
”.
•
To indicate low level commands such as AT commands.
Example: “In your terminal program, type
ATD
”.
