Chapter 4: Using the interfaces
TT 98-123789-D
Using a computer
56
Connecting to the LAN interface
This section does not describe configuration of the LAN interface. For information on
configuration, see Configuring the LAN interface on page 80.
To connect to the LAN interface, do as follows:
1.
Connect a LAN cable to the network interface of your computer.
2.
Connect the other end of the cable to the LAN connector,
marked
LAN
, in the rear connector panel of the
EXPLORER 527.
3.
Power on the EXPLORER 527.
When the EXPLORER 527 is registered on the network, the connection is automatically
established. By default, the connection is a Standard data connection.
4.
Check the connection, e.g. by starting your Internet Browser.
If connection fails, check that the interface is enabled in the EXPLORER 527. If the LAN icon is not
present in the display Main screen and in the Home window of the web interface, the interface is
disabled. See Enabling or disabling an interface on page 44.
If connection still fails, refer to the Troubleshooting Guide on page 113.
