imagistics sx1480, User Manual

Page: 107 / 185

6-11 u
sInG
f-
code features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
In
G
f
-
code
box
fea
tures
Sending a document using a subaddress and password
1
Switch to the Fax mode by pressing [COPY
4
FAX
4
SCAN].
2
Place the document on the ADF.
Adjust the document mode and contrast if necessary.
3
Press [Advanced Functions] until “F-Code Tx” appears on the LCD then press [Enter].
F-Code Tx

/

/Enter
– or –
Press the “F-Code Tx” soft key.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press [Enter].
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press [Enter].
If you do not need to enter ITU-T password, press [Enter] without entering any num-
ber.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press [Start]. Your machine begins scanning the document.
== Command:01 ==
Then, your machine dials and sends the document with the subaddress and password.
To cancel the sending in progress, press [Job Confirm./Fax Cancel] and [Cancel], [Cancel].
To cancel the delayed sending, press [Job Confirm./Fax Cancel], search the command
number you want to cancel using the cursor key, then press [Cancel], [Cancel]. (See
also “Reviewing or canceling command” on page 4-7.)
NOTE: If you frequently dial the same destination with a subaddress (and password), use the
macro key at your convenience. For details of the macro key, see page 8-4.