imagistics sx1480 User Manual Download Page 16

Page: 16 / 185

viii

Symbols and terms

In this manual, the following symbols, terms and abbreviation are used. Please familiarize yourself

with these.

WARNING

This symbol indicates how to avoid fatal or critical injuries.

CAUTION

This symbol indicates how to avoid personal injury.

IMPORTANT:

This instruction describes conditions or incorrect operations that could cause

damage to your machine.

NOTE:

A note describes helpful hints, restrictions and how to avoid problems.

[ ]

The names of the keys on the control panel.

“ ”

Items that appear on the LCD.

LCD

The Liquid Crystal Display shows messages and options during operation.

Document

Original sheet(s) of paper you send, copy and scan on your machine.

Paper

Paper to be printed on.

Tx Denotes sending.

Rx Denotes receiving.

Shows the direction of the document and paper.

Direction mark

Document placed on the

ADF

Paper loaded in the

paper cassette

or Nothing

Ex.) Letter

Ex.) Half-letter

Summary of Contents for sx1480


























































































































































































Search results

Summary of Contents for sx1480

Reviews:

Related manuals for sx1480

Brands by name

Popular brands

imagistics sx1480, User Manual

Search results

Summary of Contents for sx1480

Reviews:

Related manuals for sx1480

Brands by name

Popular brands