81
Cinemage User Manual
Version 4.1.x ©2010
Regenerate Gamut Control Calibration LUTs:
After selecting which profile you are using, this will create a new LUT to match the
monitor to the desired colorspace. This utilizes the factory calibration in the monitor and
creates a new Calibration LUT to match the factory calibration to the desired colorspace.
Main Menu: System Setup Menu: Video & Display Setup
↑
Selecting More Display Setup, you will get the following Display Setup menus:
Main Menu: System Setup: Video & Display Setup: More Display Setup Menu
Adjust Calibration Settings
This will take you into the Calibration Settings menu to control the linear segment
setting, and adjust the white point and gamma correction settings and saturation
settings. Will also allow you to save Calibration Settings.
Profiling Options
Enters the Profiling Options menu to control the Display Source, toggle the flat
field settings and turn it on and off, turn on probe auto-reading, and changing the
dual-link settings.
Manual Calibration Adjustments
This menu allows you to manually adjust the display properties in a similar
fashion to the conventional calibration found on CRT monitors. Adjustments
made in this menu can be saved by overwriting one of the existing display
profiles. For best results, Manual Calibration should be performed after an Auto
Calibration to achieve your optimal monitor response curve.
Blue Only Mode
Causes the display to only output the Blue component of the video signal. Can
be used to ensure proper monitor setup by viewing the Color Bars in blue only
mode.
Measure
Enters the Measure menu
Backlight Brightness
This USB Mouse/Trackball controlled soft menu button will adjust the intensity of
the backlight.
Back
Video Setup
Calibration Setting:
Rec 709
Calibration Type:
Gamut Controlled
Monitor Profiling
More Display Setup
Backlight
Brightness:
20%
Video Setup Calibration Setting:
Back
Adjust Calibration
Settings
Profiling Options
Manual Calibration
Adjustments
Blue Only Mode
Measure
Backlight
Brightness:
20%
