29
Cinemage User Manual
Version 4.1.x ©2010
LCD Settings –
When selecting this option you are given LCD Brightness, LCD
Contrast, and Back/Exit options. In order to change the LCD Brightness, select
the option and press right or left on the directional pad. In order to change the
LCD Contrast, select the option and press right or left on the directional pad. In
both cases, right will increase the value and left will decrease the value.
Reset –
When selected, press right on the directional pad to reset the LED and
LCD settings to defaults on the Remote Control Panel.
Back/Exit –
In order to go Back, press left when Back/Exit is selected, in order to
Exit, press right.
Misc Settings
Encoder Rate –
After entering this menu, press right or left on the directional
pad when Encoder Rate is highlighted in order to change the rate. Right will
increase the rate, while left decreases the rate.
Back/Exit –
In order to go Back, press left when Back/Exit is selected, in order to
Exit, press right.
Info
Cinemage –
When entering this menu, you are given the Model Number and the
Serial Number of the Cinemage monitor you are currently attached to. There is a
Back/Exit option at the bottom of this menu. In order to go Back, press left when
Back/Exit is selected, in order to Exit, press right.
Hardware –
When entering this menu, you are given the Model Number, Serial
Number, HW Revision of the Remote Control Panel you are currently using, as
well as the Current Date and time. There is a Back/Exit option at the bottom of
this menu.In order to go Back, press left when Back/Exit is selected, in order to
Exit, press right.
Software –
When entering this menu, you are given the current software
information of the Remote Control Panel you are currently using. There is a
Back/Exit option at the bottom of this menu.In order to go Back, press left when
Back/Exit is selected, in order to Exit, press right.
Back/Exit –
In order to go Back, press left when Back/Exit is selected, in order to
Exit, press right.
