41
Cinemage User Manual
Version 4.1.x ©2010
(If your system is set for DHCP, skip this step.) If the system is set for Static IP setup
the appropriate numbers for Wired Static DNS Address, Wired Static IP address,
Subnet Mask, and IP Gateway (See Addendum A to edit this in the prefs.xml file):
↑
↑
↑
↑
If you desire to restrict access to files stored on the Cinemage or Cinemage B Series
unit you may restrict access by setting a username and password for local network
access. If security is not a concern the default setting is a username of “guest” with no
password. To set the password, press the Back button twice:
↑
(x2)
Then press the File Sharing Setup button:
↑
And setup the Username and Password:
↑
↑
Next you must reset the systems network status by toggling the File Sharing Status to
“Enabled”, then to “Disabled”, and back again to “Enabled”:
↑
Finally you must ensure that the router has assigned an address to the unit, or that the
static IP address is correct. Hit the back button 3 times to return to the Main Menu:
↑
(X3)
Back
Wired IP Mode:
Static IP
Wired Static IP
Address:
Wired Static DNS
Address:
Wired Static IP Subnet
Mask:
Wired Static IP
Garteway:
Back
Wired IP Mode:
DHCP Mode
Wired Static IP
Address:
169.254.219.120
Wired Static DNS
Address:
192.168.1.2
Wired Static IP Subnet
Mask:
255.255.255.0
Wired Static IP
Garteway:
192.168.0.1
Back
WEB / FTP Setup
Remote File Setup
File Sharing Setup
Wired/ Wireless Setup
USB Datakey Setup
Back
Fixed Network ID
Fixed Sharing
Username
Sharing Password
File Sharing Status
Back
Fixed Network ID
Fixed Sharing
Username
Sharing Password
File Sharing Status
Back
Fixed Network ID
Fixed Sharing
Username
Sharing Password
File Sharing Status
