Operation via Management Software
Draco MultiView 4K
60
168
Focusing on another Input and Changing the Display Mode
To simultaneously focus on another input and change the display mode via management software, proceed
as follows:
1. Click
Status & Updates > Device Status
in the task area.
2. Click the desired input (e.g., input 3), hold down the mouse button and drag the mouse to the desired
output (e.g., secondary output).
The available ports for switching are highlighted in green without red cross.
3. Release the mouse button.
A context menu shows the available display mode for this switching procedure.
4. Click
Fullscreen
in the context menu to focus on the selected input.
Fig. 135 Example - Focusing on another input and changing the display mode by dragging
The video signal of the selected input 3 is focused on the main monitor and the display mode is
changed to the Fullscreen Mode. Monitor 2 shows the video signal of the selected input. The USB-HID
control remains at the input that is switched to the main output.
Fig. 136 Example - Changed display mode by focusing on another input by dragging
