Ihse MV42 Series User Manual Download Page 110

Page: 110 / 225

Configuration via Management Software

Draco MultiView 4K

110

Multicast

Field

Entry

Description

Multicast

Byte

Enter the multicast address if using within a multicast group

(default: broadcast 255.255.255.255).

Network Services

Field

Status

Description

API Service

Activated

Activate the LAN interface at the Draco MV for access via

management software (API service port 7055/7056) (default).

Deactivated

Function not active.

SSL Support

Activated

Activate SSL encryption for API, management software API,

management software and Draco MV communication.

Deactivated

Function not active (default).

Maintenance Service

Activated

Enable the maintenance service for advanced diagnostic.

Deactivated

Function not active (default).

To set parameters for the network configuration, proceed as follows:
1. Click

System Settings > Network

in the task area.

2. Click

Activate Edit Mode

in the toolbar.

3. Change the desired settings.
4. Click

Apply

to confirm the changes.

5. Click

Deactivate Edit Mode

in the toolbar.

Summary of Contents for MV42 Series


































































































































































































































Search results

Summary of Contents for MV42 Series

Reviews:

Related manuals for MV42 Series

Brands by name

Popular brands

Ihse MV42 Series, User Manual

Search results

Summary of Contents for MV42 Series

Reviews:

Related manuals for MV42 Series

Brands by name

Popular brands