Maintenance
Draco MultiView 4K
60
194
15.3.6 Updating the Firmware via Management Software
The firmware of the Draco MV can be updated in this menu, except for the HUSWMSD firmware type that
has to be updated via Mini-USB service port if necessary.
An update of the HUSWMSD firmware is usually not necessary. In rare cases, an update may only be
necessary to expand the functionality for specific requirements. In this case, please contact the
manufacturer’s technical support in advance.
If required, the update files can be requested from the manufacturer’s technical support.
NOTICE
To process successful firmware updates and avoid failures:
Only use computers to update the Draco MV that are not integrated into the Draco MV setup.
Ensure that the computer used for the update is not set into standby mode or sleep mode during the
update.
Save your configuration locally before starting the update.
Proceed an update via direct LAN connection for reasons of network stability.
Fig. 159 Management software menu
Status & Updates - Firmware Update
