Access and Operation Options
Draco MultiView 4K
60
48
4.1 Command Mode
To start the command mode, use a keyboard sequence (Hot Key) at the keyboard plugged in the
Draco MV. To exit the command mode, press Esc.
NOTICE
While in command mode,
the Caps Lock and Scroll Lock LEDs on the keyboard are flashing,
the USB-HID devices are not operable, mouse and keyboard functions are deactivated,
only selected keyboard commands are available.
If there is no keyboard command executed within 10 seconds after activating the command mode, it will be
deactivated automatically.
The following keyboard commands are used to enter, and to exit the command mode, and to change the
Hot Key.
Function
Keyboard command
2x Left Shift (Hot Key,
factory setting)
Start the command mode.
Esc
Exit the command mode.
current Hot Key, c, new
Hot Key Code, Enter
Change the Hot Key.
NOTICE
If installing the Draco MV with additional KVM devices (e.g., KVM matrix switch, KVM extender, or
U-Switch), please note the existing Hot Keys of the KVM devices. For instance, the Hot Key 2x Left Shift
opens the OSD of the Draco tera matrices.
Different Hot Keys for the individual KVM devices must be defined, e.g., 2x Right Shift for the
Draco MV.
Hot Key Code
The Hot Key to start the command mode can be changed. The following table lists the Hot Key codes for
the available Hot Keys.
Hot Key Code
Hot Key
0
Freely selectable, except Esc, Del and Enter
2
2x Scroll
3
2x Left Shift (default)
4
2x Left Ctrl
5
2x Left Alt
6
2x Right Shift
7
2x Right Ctrl
8
2x Right Alt
