Installation
Draco MultiView 4K
60
60
5
Installation
First-time users are recommended to set up the system in a test environment that is limited to a single
room. This makes it easier to identify and solve any cabling problems, and experiment with your system
more conveniently.
5.1 Setting up the Draco MV
5.1.1 Connecting the Draco MV to the Sink and the Sources
NOTICE
Function restriction when connected to the wrong inputs/outputs
The inputs and outputs of the primary video/audio board belong together. The same applies to the
secondary video/audio board. The boards themselves are not linked to each other.
The primary and secondary boards switch completely independently. It is not possible to use input signals
from the primary board on the output of the secondary board and vice versa.
If only one monitor is connected to output 2 of the primary video board, or monitors are connected only to
outputs of the secondary video board of Dual-Head systems, several functions will not work.
The OSD only opens on a monitor connected to the main output. The layouts of the Free Mode can only
be configured on a monitor connected to main output. And for some display modes, the main monitor is
required.
Always connect Single-Head sources on the primary video board.
Connect a monitor to the main output (OUT1.x) of the primary video/audio board.
Always observe the assignment of the inputs to the outputs, see overview in chapter 3.2, page 14.
NOTICE
Scaled video resolution when using different monitor resolutions
The video output adjusts to the resolution of the monitor with the lower preferred timing.
For optimal functionality of switching the USB-HID control, focusing on inputs, streaming of associated
video signals and the best display of all display modes, we recommend connecting in ascending order
without leaving any inputs between empty.
For instance, when connecting three sources, connect the sources to inputs 1 to 3.
Note the window arrangement of the display modes (see from chapter 3.3 ff, page 21).
Please verify that interconnect cables, interfaces, and handling of the devices comply with the requirements
(see chapter 15.2, page 179). To achieve the best possible performance and results with the Draco MV
system, we recommend using the supplied cables. If you need a replacement, please use the spare parts
specified for this device, which can be found in the accessories list (see chapter 3.6, page 36).
The MSC function cannot be guaranteed when using wireless keyboards and mice.
We recommend using wired keyboards and mice to guarantee the proper function of the MSC.
When the device is started for the first time or restarted, the USB-HID control is initialized and activated on
the source connected to the first input. With the first switching of the USB-HID control to another input, the
mouse initialization process for the connected source is started. After initialization, the mouse is available
for the corresponding source and is displayed in the associated window.
To power up the system, the following sequence is recommended:
Monitor - Draco MV - source.
