Ier 567 Maintenance Manual Download

Page: 69 / 76

IER 567 Counter Top Printer – Level 1 Maintenance Manual

N00272A

Page 3-21

Revision level: 1

October 28, 2003

Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite

This document is the property of IER and may not be reproduced or communicated without prior written authorization

Badly printed coupon in

front stacker

Drive

Printer

components

Clean the platen.

Check that nothing
blocks coupon feed
into the front stacker.

Replace the printer.

Clean the thermal printhead.

Check the thermal printhead
connections.

Check that the thermal printhead
and its support are snapped in
place (especially on the central
mounting plate side).

Check that the printhead is
correctly lowered using the Tests
submenu (see Chapter 2 of this
manual).

If the printhead cam is displaced
when lowered, check the
printhead support spring guide for
fouling.

Replace the thermal printhead.

Replace the printer.

In case of thermal transfer, if the
ribbon is wrinkled, feed the ribbon
by hand and tauten it before
reinstalling the cartridge.

Install a new ink ribbon.

Printing problem

(poor print quality)

NO MESSAGE

DISPLAYED

Coupons

Check the physical
condition of the
coupons.

Check that the
physical
characteristics of
the coupons
conform to IATA
specifications.

Replace the faulty
coupon bin(s).

Message

displayed

Symptoms

Probable causes

Corrective

actions

Figure 3-14

Poor print quality (badly printed coupon in front stacker) – Message displayed: No message

displayed

Summary of Contents for 567













































































Search results

Summary of Contents for 567

Reviews:

Related manuals for 567

Brands by name

Popular brands

Ier 567, Maintenance Manual

Search results

Summary of Contents for 567

Reviews:

Related manuals for 567

Brands by name

Popular brands