IER 567 Counter Top Printer – Level 1 Maintenance Manual
N00272A
Page 2-25
Revision Level 2
Nov. 28, 2005
Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite
This document is the property of IER and may not be reproduced or communicated without prior written authorization
PROCEDURES
B-5
Restoring to Initial Condition
Estimated time: 10 min.
1) Procedure
After the scheduled maintenance operations:
a) Check that the magnetic module (1) is correctly snapped in its housing.
b) Check that the hinged top part (2) is correctly locked in lowered position.
c) Check that the rotating flange (3) is correctly positioned on the central mounting plate.
d) Check that the printhead (4) is snapped on the front and in place in its support (see Sheet C-1).
e) Reconnect the printer to the host computer and AC line power.
f)
Install the ribbon cartridge (5) if you are servicing a thermal transfer printer.
g) Close the operator access door (6).
h) Reload the blank coupons.
i)
Print the status coupon (see page 2-7) to perform an operational check of the printer.
SHEET B-5
IER 567 PRINTER
2
4
6
3
1
5
