IER 567 Counter Top Printer – Level 1 Maintenance Manual
N00272A
Page 2-17
Revision Level 2
Nov. 28, 2005
Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite
This document is the property of IER and may not be reproduced or communicated without prior written authorization
g) Open again the operator access door (3).
h) Open the hinged top part (7) of left paper guide.
i)
Pull the rotating flange (8) up to the raised position (see Sheet C-1).
j)
Hold the magnetic module (9) in the raised position (see Sheet B-3).
k) Use the air duster from the IER cleaning kit (IER P/N S32129A) to remove dust from the entire
paper path. Pay particular attention to the area around the burster (10).
l)
Using a vacuum cleaner adapted to printer cleaning, remove the dust from the electronics module
(3) (module and central mounting plate).
m) Return the magnetic module (9) to its initial position, snapping it in place on the support (11).
n) Close the hinged top part (7) of the left paper guide.
o) Return the rotating flange to its initial position (8).
p) Swing the electronics module (3) back to its closed position and lock it.
5) Final
Checks
Refer to Sheet B-5.
7
9
8
3
11
10
