Ier 567 Maintenance Manual Download

Page: 63 / 76

IER 567 Counter Top Printer – Level 1 Maintenance Manual

N00272A

Page 3-15

Revision level: 1

October 28, 2003

Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite

This document is the property of IER and may not be reproduced or communicated without prior written authorization

Message

displayed

Symptoms

Probable causes

Corrective

actions

Drive

Magnetic

sensor

Coupons

Clean the drive
assemblies.

Especially check the
pressure roller.

Replace the printer.

Test the magnetic
sensor using the
Tests submenu (see
Chapter 2 of this
manual).

Clean the sensor.

Replace the printer.

Check that the coupons
have a magnetic stripe.

Check the coupon feed
direction.

Check the physical
condition of the coupons.

Check that the physical
characteristics of the
coupons conform to IATA
specifications.

Replace the faulty
coupon bin(s).

Paper path

Check that the hinged top part and
rotating flange are closed.

Open the hinged top part and
rotating flange and inspect/clean
the paper path.

Replace the printer.

Magnetic

head

Clean the magnetic head and
the magnetic head pad.

Check its connection.

Check the condition of the
magnetic head support box
(especially the attachment
hook).

Check the condition of the
pressure roller (s
spring).

Replace the printer.

Coupon canceled

Magnetic

problem

W A R N I N G

M A G

E N C O D E

E R R O R

1 2 3

Figure 3-8 Magnetic problem – Message displayed: WARNING MAG ENCODE ERROR 123 123 123

Summary of Contents for 567













































































Search results

Summary of Contents for 567

Reviews:

Related manuals for 567

Brands by name

Popular brands

Ier 567, Maintenance Manual

Search results

Summary of Contents for 567

Reviews:

Related manuals for 567

Brands by name

Popular brands