IER 567 Counter Top Printer – Level 1 Maintenance Manual
N00272A
Page 1-7
Revision Level 2
Nov. 28, 2005
Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite
This document is the property of IER and may not be reproduced or communicated without prior written authorization
The line and box concerning the secured cabinet appear only if the secured cabinet is present.
The bin field can be set to "2 h/w", "2 s/w" or "3".
The line giving the baud rate does not appear for Ethernet and USB connections.
The line giving the number of bits, parity, etc. is replaced where applicable by Ethernet connection or
USB connection.
1-4-3 Status
Coupon
The lines concerning Bin 3 appear only if bin 3 is present and activated in the menu.
The lines concerning the Ribbon appear only if the ribbon controller is present.
The lines concerning the magnetic module and SCN appear only if the magnetic module is present.
The lines concerning COM1 do not appear for network and USB connections.
- -> 567 ST ATUS CO UP ON <--
Serial number :
123467
Software main board rev. :80450 / 0.00
Software check sum :
0x12345678
ATB specifications :
AEA1999
Coupon count :
1234567
Power on time :
1234567 hours
Display language :
French
Top print position (in tenth of mm) :
-123
Left print position (in tenth of mm) :
-123
Thermal mode :
Thermal paper
Ribbon passes :
5
Default bin :
1
Connexion type :
rs232
Com 1 baud rate :
57600
Com 1 parity :
none
Com 1 data bits :
8
Com 1 stop bits :
1
Bin 1 coupon type :
1
Bin 1 coupon length :
7"3/8
Bin 1 print speed :
7"/s
Bin 1 print contrast :
-2
Bin 1 magnetic encoding : Verification on
Bin 1 SCN verification :
Yes
Bin 1 SCN control order : Ascending
Bin 2 coupon type :
1
Bin 2 coupon length :
7"3/8
Bin 2 print speed :
4"/s
Bin 2 print contrast :
5
Bin 2 magnetic encoding : Verification off
Bin 2 SCN verification :
Yes
Bin 2 SCN control order : Descending
Bin 3 coupon type :
1
Bin 3 coupon length :
8"
Bin 3 print speed :
8"/s
Bin 3 print contrast :
0
Bin 3 magnetic encoding : Verification on
Bin 3 SCN verification :
No
Bin 3 SCN control order : Ascending
Front print speed :
8"/s
Front print contrast :
0
Front magnetic encoding : Verification on
Scn check-digit :
No
