IER 567 Counter Top Printer – Level 1 Maintenance Manual
N00272A
Page 2-8
Revision Level 2
Nov. 28, 2005
Ce document est la propriété de IER et ne doit pas être reproduit ou communiqué sans autorisation écrite
This document is the property of IER and may not be reproduced or communicated without prior written authorization
d) The status coupon is printed and the message “PRINTING . . .” remains displayed during printing.
e) Retrieve the printed coupon either from the front stacker or the internal reject bin, depending on the
application.
4)
Printing the Configuration Coupon
The configuration coupon shown in Chapter 1 is printed from the
General parameters
submenu.
IMPORTANT: You must enter a password to access the General parameters submenu. You can
obtain it from IER’s technical department. Ask us.
Note:
Fill beforehand the appropriate bin with coupon stock.
a) Select
the
General parameters
item using the two arrow keys
▲
▼
.
M a i n m e n u
P r i n t s t a t u s c o u p o n
P r i n t A T B c o u p o n
Æ
G e n e r a l
p a r a m e t e r s
b) Hit
Enter
to confirm. The following message is displayed:
G e n e r a l
P a r a m e t e r s
E n t e r p a s s w o r d
0 0 0 0
0
c) Enter your password using the arrow keys
◄
►
to select a digit and
▲
▼
to change a digit.
d) Hit
Enter
to confirm. The following message is displayed:
G e n e r a l
P a r a m e t e r s
Æ
P r i n t c o n f i g c o u p o n
P r i n t p a r a m e t e r s
B i n p a r a m e t e r s
e) Hit
Enter
to confirm. The following message is displayed:
G e n e r a l
p a r a m e t e r s
Æ
P r i n t c o n f i g c o u p o n
f r o m b i n
x
f)
Use the two arrow keys
▲
▼
to enter the required bin number
X
.
g) Hit
Enter
to confirm. The following message is displayed:
G e n e r a l
p a r a m e t e r s
P r i n t c o n f i g c o u p o n
f r o m b i n
x
P R I N T I N G . . .
h) The configuration coupon is printed and the message “
PRINTING
. . .
” remains displayed during
printing.
i)
Retrieve the printed coupon either from the front stacker or the internal reject bin, depending on the
application.
