IEI Technology POS-6614, User Manual

Page: 89 / 236

POS-6614 Motherboard
Place the motherboard on an antistatic pad :
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
Turn all power to the POS-6614 motherboard off :
o
When working with the POS-6614 motherboard, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the POS-6614 motherboard DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2 Unpacking
NOTE:
If any of the items listed below are missing when the POS-6614
motherboard is unpacked, do not proceed with the installation. Contact the
POS-6614 motherboard reseller or vendor.
4.2.1 Unpacking Precautions
Some components on POS-6614 motherboard are very sensitive to static electricity and
can be damaged by a sudden rush of power. To protect the POS-6614 motherboard from
being damaged, by ESD follow these precautions:
Any person handling the POS-6614 motherboard should be grounded. This
removes static charge before the POS-6614 motherboard is touched. To
remove static electricity, wear a grounded wrist strap at all times or frequently
touch any conductive materials that are connected to the ground.
Page 89