IEI Technology POS-6614 User Manual Download Page 101

Page: 101 / 236

Page 101

POS-6614 Motherboard

4.5.5 CompactFlash Installation

When appropriately formatted, a CompactFlash disk can serve as a bootable hard drive in

applications where installation space is limited. The Compact Flash card occupies a

secondary IDE channel. The compact flash connector is located on the bottom of the

motherboard. To install a CompactFlash card onto the motherboard, follow the

instructions below.

Step 1:

Turn the motherboard over so that the CompactFlash socket is facing up.

Step 2:

Gently insert the CompactFlash chip into the socket until it clicks into place.

Step 3:

To release the CompactFlash chip from the socket, push the release button

located next to the socket.

Step 0:

Figure 4-9: Inserting a CompactFlash Card

4.5.6 Cooling Fan Power Connections

There are cooling fan connectors on the POS-6614 motherboard labeled

SYS_FAN1

SYS_FAN2

, and

CPU_FAN1

. The four pin

CPU_FAN1

connector should be used to

connect the CPU cooling fan. To install a CPU cooling fan onto the motherboard, see

Section

4.4.2

. To power a cooling fan, follow the instructions below.

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands