IEI Technology POS-6614 User Manual Download Page 70

Page: 70 / 236

POS-6614 Motherboard

CAUTION!

SATA hard drives may come with both a 4P power connector and a SATA

power interface. Attach either the 4P connector or the SATA power cable to

the SATA hard drives.

DO NOT

attach both the power connectors to your

SATA hard drives at the same time! Doing so will cause damage.

NOTE:

1. SATA is supported by:

•

Windows 2000 SP4

•

Windows XP SP1

•

Windows 2003, or later versions.

Older OSes, such as Windows 98SE or ME, do not support the SATA interface.

3.2.17 Serial Communications Connector

CN Label:

COM3, COM4, COM5, COM6

CN Type:

10-pin box headers (2x5 pins)

CN Location:

See Figure 3-19

CN Pinouts:

See Table 3-20

The POS-6614 offers four ten-pin box headers for RS-232 serial connections.

Page 70

IEI® Technology, Corp

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands