IEI Technology POS-6614 User Manual Download Page 113

Page: 113 / 236

Page 113

POS-6614 Motherboard

4.8.3 Ethernet Connection

The external RJ-45 connectors can be connected to an external LAN and communicate

with data transfer rates up to 1Gb/s.

4.8.4 Keyboard and Mouse Connection

A PS/2 keyboard and a PS/2 mouse can be connected to the appropriate PS/2 connector

on the external peripheral interface panel.

4.8.5 Serial Connection

The external serial connectors provide easy and quick access to external serial devices.

4.8.6 Parallel Connector

The external parallel port connector connects to a printer. The parallel port interface can

be re-assigned to LPT2 or LPT3 through the BIOS configuration utility. The default

interrupt channel is IRQ7. Select ECP or EPP DMA mode using the BIOS configuration

utility.

4.8.7 Audio Interface

AC’97 Audio signals are interfaced through three phone jack connections. The red phone

jack is for Mic In, blue is for Line In and green is for Speaker Out.

4.8.8 VGA Connection

The conventional CRT monitor connector, VGA1, is an HD-D-sub 15 female connector.

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands