IEI Technology POS-6614, User Manual

Page: 225 / 236

POS-6614 Motherboard
E.2.2 Install SATA Drives
Turn on the motherboard and enter the BIOS setup utility. Do this by pressing
D
ELETE
when the system boots up.
When the Exit menu appears, select the “ Save Changes and Exit ” menu
option. Step 0:
To implement the on-chip RAID function, two SATA drives must be connected to the
system. Use the SATA drive cables that came with the system to connect the SATA
drives.
E.2.3 Configure the SATA Controller in BIOS
To configure the RAID BIOS, follow the steps below:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 1:
Step 2:
Select the Advanced Settings menus.
Select the IDE Configuration sub-menu.
In the IDE Configuration sub-menu select the “ Onboard PCI S-ATA
Controller ” option.
Set the “ Onboard PCI S-ATA Controller ” option to the “ Raid Mode ” and press
E
NTER
.
Save the changes and exit the BIOS setup utility. To do this, hit the escape key
and select the Exit menu from the top menu bar in the BIOS utility setup.
E.2.4 Configure the RAID BIOS
The next step is to configure the BIOS RAID. To do this, follow the steps below.
Restart the system. Wait for the POST to be completed.
The system prompts the user to press < C
TRL
> and < S > to enter the BIOS RAID
Setup Utility ( Figure E-4 ).
Page 225