manualshive.com logo in svg

IEI Technology POS-6614, User Manual

Share
Download
IEI Technology POS-6614 User Manual Download Page 165

 

POS-6614 Motherboard

The boot sequence from the available devices is selected. If the “

1st Drive

” option is 

selected a list of available FDDs is shown. Select the first FDD system boots from. If the 

“

1st Drive

” is not used for booting this option may be disabled. 

BIOS Menu 2 : Removable Drives 

0

Menu 20

5.5.5 CD/DVD Drives 

The 

CD/DVD Drives

 menu (

BIOS Menu 21

) is similar to the 

Removable Drives

 

BIOS 

 

and it specifies the boot sequence of the available CD/DVD drives. When the 

menu is opened, the CD drives and DVD drives connected to the system are listed as 

shown below: 

 

1st Drive 

[CD/DVD: PM-(part ID)] 

 

2nd Drive 

[HDD: PS-(part ID)] 

 

3rd Drive 

[HDD: SM-(part ID)] 

 

4th Drive 

[HDD: SM-(part ID)] 

 

 

Page 165

 

Summary of Contents for POS-6614













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands