IEI Technology POS-6614 User Manual Download Page 163

Page: 163 / 236

POS-6614 Motherboard

5.5.3 Hard Disk Drives

The

Hard Disk Drives

menu (

BIOS Menu 19

) is similar to the

Removable Drives

BIOS

Menu 20

and it specifies the boot sequence of the available HDDs. When the menu is

opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

2nd Drive

[HDD: PS-(part number)]

3rd Drive

[HDD: SM-(part number)]

4th Drive

[HDD: SM-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “

1st Drive

” and “

2nd Drive

” are listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available HDDs is shown. Select the first HDD system boots from. If the

“

1st Drive

” is not used for booting this option may be disabled.

Page 163

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands