IEI Technology POS-6614 User Manual Download Page 154

Page: 154 / 236

POS-6614 Motherboard

Palette Snooping [Disabled]

Use the

Palette Snooping

option to enable or disable the palette snooping function.

Disabled D

EFAULT

Unless the VGA card manufacturer requires palette

snooping to be enabled, this option should be disabled.

Enabled

PCI devices are informed that an ISA based Graphics

device is installed in the system so the ISA based

Graphics card functions correctly. This does not

necessarily indicate a physical ISA adapter card. The

graphics chipset can be mounted on a PCI card. Always

check with the adapter card manual first, before

modifying the default settings in the BIOS.

PCI IDE BusMaster [Disabled]

Use the

PCI IDE BusMaster

BIOS option to enable or prevent PCI IDE busmastering.

Disabled D

EFAULT

Busmastering is prevented

Enabled

IDE controller on the PCI local bus has mastering

capabilities

Page 154

IEI® Technology, Corp

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands