IEI Technology POS-6614 User Manual Download Page 148

Page: 148 / 236

POS-6614 Motherboard

Onboard SiS USB2.0 DEVICE [Enabled]

Use the

Onboard SiS USB2.0 DEVICE

option to enable or disable the onboard SiS

USB2.0 controller. If disabled, USB2.0 devices cannot be used.

Disabled

USB 2.0 interface is disabled and cannot be used.

Enabled D

EFAULT

USB 2.0 interface is enabled and can be used.

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [FullSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed D

EFAULT

The controller is capable of operating at 12Mb/s

HiSpeed

The controller is capable of operating at 480Mb/s

BIOS EHCI Handoff [Enabled]

Use the

BIOS EHCI Handoff

option for systems running OSes that do not have EHCI

hand-off support. The EHCI ownership change is managed by the EHCI driver.

Page 148

IEI® Technology, Corp

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands