IEI Technology POS-6614 User Manual Download Page 103

Page: 103 / 236

POS-6614 Motherboard

NOTE:

Be sure to configure the

J_COM2_SEL1

and

J_COM2_SEL2

COM2 RS422/RS485

jumpers for either an RS-422 or RS-485 connection. Refer to

Section

4.6.4

for more

information.

4.5.9 Floppy Disk Drive (FDD) Installation

The floppy drive connector provides access to one (1) externally mounted floppy drive.

A 34-pin FDD connector cable is required for the connection to the floppy drive. The cable

should come with a 34-pin FDD-cable connector and floppy disk drive connector on the

other end. Follow the instructions below to connect a FDD to the motherboard.

Step 1:

Step 2:

Step 1:

Step 2:

Step 3:

Plug the 34-pin FPC-cable connector into

FDD1

. Make sure that the red wire

corresponds to pin one on the connector.

Attach the appropriate connector on the other end of the cable to the floppy drive.

Only one connector in the set can be used.

Step 0:

4.5.10 IDE Disk Drive Connector

The cable used to connect the motherboard to the IDE HDD is a standard 40-pin

ATA/100/66/33 flat cable. To connect an IDE HDD to the motherboard, follow the

instructions below.

Find the ATA 66/100 flat cable in the kit that came with the motherboard.

Connect one end of the cable to either the

PIDE1

(primary IDE) or

SIDE1

(secondary IDE) connector on the motherboard. A keyed pin on the IDE

connectors prevents it from being connected incorrectly.

Locate the red wire on the other side of the cable that corresponds to the pin 1

connector.

Page 103

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands