IEI Technology POS-6614 User Manual Download Page 175

Page: 175 / 236

POS-6614 Motherboard

Resume On PME# [Enabled]

The

Resume On PME#

BIOS option to enable the system to be roused from a suspended

or standby state when there is activity on the PCI PME (power management event)

controller.

Disabled

Wake event not generated by PCI PME controller

activity

Enabled D

EFAULT

Wake event generated by PCI PME controller activity

Restore on AC Power Loss [Last State]

Use the

Restore on AC Power Loss

option to specify what state the system returns to if

there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Page 175

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands