IEI Technology POS-6614 User Manual Download Page 126

Page: 126 / 236

POS-6614 Motherboard

Host & Device

EFAULT

Both the motherboard onboard IDE controller and

IDE disk drive are used to detect the type of IDE

cable used.

Host

The motherboard onboard IDE controller detects

the type of IDE cable used.

Device

The IDE disk drive to detects the type of IDE cable

used.

IDE PIO Pre-Fetch Enable [Disabled]

Use the

IDE PIO PreFetch Enable

Option to enable the IDE controller to pre-fetch IDE

data.

Disabled D

EFAULT

IDE controller cannot pre-fetch data

Enabled

IDE controller can pre-fetch data

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the IDE Configuration menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

Third IDE Master

Fourth IDE Master

The IDE Configuration menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section

5.3.2.1

appear.

Page 126

IEI® Technology, Corp

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands