IEI Technology POS-6614 User Manual Download Page 31

Page: 31 / 236

POS-6614 Motherboard

2.9 Serial Ports

The POS-6614 motherboard has six high-speed UART serial ports, configured as COM1

through COM6. The serial ports have the following specifications.

16C550 UART with 16-byte FIFO buffer

115.2Kbps transmission rate

2.10 Infrared Data Association (IrDA) Interface

The POS-6614 Motherboard IrDA supports the following interfaces.

Serial Infrared (SIR)

Shift Keyed Infrared (ASKIR)

If you want to use the IrDA port, you have to configure SIR or ASKIR mode in the BIOS

under

Super IO devices

. Then the normal RS-232 COM 2 will be disabled.

2.11 USB Interfaces

The POS-6614 Motherboard has eight USB interfaces, six internal and two external. The

USB interfaces support USB 2.0.

2.12 PCI Interfaces

The POS-6614 motherboard offers one PCI Slot Expansion Module for board expansion.

2.13 BIOS

The POS-6614 Motherboard uses a licensed copy of AMI BIOS. The features of the flash

BIOS used are listed below:

SMIBIOS (DMI) compliant

Console redirection function support

PXE (

re-Boot E

ecution

nvironment ) support

USB booting support

Page 31

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands