IEI Technology POS-6614 User Manual Download Page 151

Page: 151 / 236

POS-6614 Motherboard

The device can be either A: or B: responding to

INT13h calls that return DL = 0 or DL = 1

respectively.

Forced FDD

Allows a hard disk image to be connected as a

floppy image. This option works only for drives

formatted with FAT12, FAT16 or FAT32.

Hard Disk

Allows the USB device to be emulated as hard disk

responding to INT13h calls that return DL values of

80h or above.

CDROM

Assumes the CD-ROM is formatted as bootable

media. All the devices that support block sizes

greater than 512 bytes can only be booted using this

option.

5.4 PCI/PnP

Use the PCI/PnP menu (

BIOS Menu 15

) to configure advanced PCI and PnP settings.

WARNING!

Setting wrong values for the BIOS selections in the PCIPnP BIOS menu

may cause the system to malfunction.

Page 151

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands