Delete a Remote Transmitter
To delete a remote transmitter:
1.
Press and hold the [*] key for 3 seconds
2.
Enter the master code
3.
Enter the user number followed by [*][*]
[*] [1][2][3][4] [2][*][*]
Master User
Code Number
Button Properties
Changing button properties for a remote transmitter will change the properties for all remote
transmitters.
Panic Button
To allocate a panic button
1.
Switch dip switch 4 on then 8 on
2.
Press the button on the remote transmitter that you want as the panic button
3.
Switch dip switch 8 off
4.
Switch dip switch 4 off
4
8
Dip switch 8 goes on last but first off after pressing the button
Disable the 3 second Panic
By default if you hold any button down for 3 seconds the system will trigger a panic condition. To disable
the 3 second panic feature, leave dip switch 7 on
7
Arm Protect
This will stop the system from responding to arm, stay arm and disarm signals for 20 seconds from the
last signal
To enable Arm Protect, leave dip switch 2 on
2