Location
A location is a single tiered location holding a single value. The location is entered and the value is
inserted confirmed by the star key. Once confirmed the location is exited automatically.
The following steps show how to program standard locations.
Keypress
Explaination
Visual Indicator
[9] [9] [9] [9]
Installer code to enter programming
mode.
Ready LED will flash to indicate
programming mode has been entered
[Location No.]
[*]
Enter the location number that belongs to
the option that is to be changed.
Ready keeps flashing. Away will come on.
[Value] [*]
Enter the value that will make the system
do what is required or [#] to exit.
A long beep will be heared if the value is
acceptable. (3 beeps if there is an error).
If correct the ready LED will flash showing
that the location has been exited.
[#]
Once all locations have been changed.
Press [#] to exit programming mode
When programming a location, any attempt to enter invalid data will result in an error beep (3 short
beeps).
The AWAY LED will remain on after the error beeps. Re-enter the correct data. There is no need to press
the [#] key to exit the location.
EXAMPLE:
[INSTALLER CODE] [*] [0] [*] [VALUE] [*]
To read the value that is in a location, each zone is given a value. The values are added up of each zone
that is on. The diagram below shows the given value to each of the zone.
128
64
32
16
8
4
2
1
Value