IDS 805, Training Manual, Page: 21 / 38

Location 80 to 133: Reporting Codes
These are the codes that the device at the monitoring company will turn into the corresponding action for
the operator to read and know what the incident is and react accordingly.
Note: Not required for Contact-ID. To disable a Contact-ID reporting code, enter 00 into the location
Location Description Location Description
82 – 83 Keypad Panic 117 Bypassed Zone
84 – 85 Keypad Tamper 118 Zone Tamper
86 – 101 Zones (2 locations per
zone)
119 Zone Shutdown
102 –
103
AC Fail 120 Cancel
104 –
105
AC Restore 121 Zone Restoral
106 –
107
Siren Tamper 122 - 123 Download Complete
108 Away Arm 124 - 125 Telephone Line Monitoring Fail
109 Disarm 126 - 127 Telephone Line Restoral
110 Stay Arm 128 - 129 Low Battery
111 - 112 Auto Test 130 - 131 Low Battery Restoral
113 - 114 Keypad Fire 132 - 133 Box Tamper
115 - 116 Keypad Medical
Location 136 to 139: Installers Code
The default Installers code is 9999 and should always be changed once all programming is done.
Location 136 137 138 139
Value 9 9 9 9
Location 140: Swinger Shutdown Count
This is the number of times a zone must be violated while the system is armed, before it will be
automatically bypassed.
The value that is entered will be doubled. The range that can be entered is 0 to 15.
0 disables swinger shutdown.
Example: If a 5 is entered then the zone must be violated 10 times before the zone is bypassed.
Location 141: Zone Loop Response
This is the time the zone must remain violated before an alarm is registered by the system.
Value Response
Time
Value Response
Time
Value Response Time
0 100ms 6 72ms 12 144ms
1 12ms 7 84ms 13 156ms
2 24ms 8 96ms 14 168ms
3 36ms 9 108ms 15 180ms
4 48ms 10 120ms
5 60ms 11 132ms