1-3
1
address string prefixed to the SCPI commands and only responds to those
commands with an address that matches the one stored in its Flash memory.
For secure applications, the 2307 can be set to operate in a packet mode
where the commands and responses are encoded in a packet with a
checksum. In this case, the 2307 only executes commands in valid packets
that contain the board's address.
1.2.3
Modules
The Model 4867 and 2367 DAQ and Control Modules are packaged in
ICS's Minibox case and are powered by a companion wall mounted AC
power adapter. The analog and digital signals are on a right-angle metal
shell connector with lock studs for secure signal connections in any
application. The Model 4867 has an GPIB/IEEE-488.2 compatible interface
and a standard GPIB connector for connection to an IEEE-488 Bus. The
Model 2367 has RS-232/RS-422/RS-485 compatible serial interfaces on a
right-angle 25-pin DB connector for direct connection to a serial link. Both
modules are designed for stand-alone use or for mounting in a rack mount
kit.
The 2367 may be controlled over an RS-232 or RS-422/RS-485 serial link
as described above for the Model 2307.
1.2.4
OEM Boards
The PC Board Assemblies from the 4867 and 2367 Modules are available
as OEM PCB Assemblies. These PCB Assemblies are available with just
GPIB or Serial interfaces or with both GPIB and Serial interfaces.
P/N 115097-01 GPIB Interface
P/N 115097-02 Serial Interface
P/N 115097-03 GPIB and Serial Interface
The OEM Board Assemblies have 0.187 inch high standoffs for mounding
against a metal plate.
