2-1
2
2
Installation
2.1
INTRODUCTION
This section provides the user with directions for shipment verification, for
configuring the 4807/2307/4867/2367 and for connecting it to the host
device.
2.2
SHIPMENT VERIFICATION
When unpacking, check the unit for signs of shipping damage (damaged
box, scratches, dents, etc.) If the unit is damaged or fails to meet
specifications, notify ICS Electronics or your local sales representative
immediately. Also, call the carrier immediately and retain the shipping
carton and packing material for the carrier's inspection. ICS will make
arrangements for the unit to be repaired or replaced without waiting for the
claim against the carrier to be settled.
Verify that the following items were included with your unit and that you
have the correct model dash number:
(1)
Model 4807 or Model 2307 DAQ & Control Board
or a Model 4867 or Model 2367 DAQ & Control Module.
(1)
DAQ & Ctl Instruction Manual.
(1)
62-pin mating solder eyelet connector and hood.
(1)
Support CD-ROM.
The mating GPIB and serial connectors are not part of the shipping
configuration and must be ordered separately.
