ICS ELECTRONICS 4807, Instruction Manual

Page: 19 / 165

1-14
1
TABLE 1-2 2307/2367 CONFIGURATION PARAMETERS
Command Function Factory Setting
:BAUD Sets baud rate 9600
:PARity Sets parity NONE
:BITS Sets number of data bits 8
:SBITS Sets number of stop bits 1
:NETwork Enables network protocol OFF
:ADDRESS Sets 2307's Serial address 4
:RS485 Tristates transmitter when idle ON
:INPut Sets number of Talk bytes 4 #
:POLarity Sets Input polarity 1 #
:TALK Selects Input Format HEX #
:OUTput Sets number of Listen bytes 0 #
:POLarity Sets Output polarity 1 #
:LISTen Sets Output Format HEX #
:LIMit Output voltage 10 #
:OFFSET Output voltage offset 0 #
:SLOPe Output voltage scale factor 1 #
:RANGe Measure voltage range 10 #
:POLarity Measure voltage range polarity 2 #
:AVERage Averaging value (all channels) 20 #
:LOCK Blocks # items from changes Off
:IDN Sets user's IDN message ICS IDN msg #
:QUES Reg Enables digital signal changes 0 *
:PTRANSISTION Enables positive going inputs All 1s *
:NTRANSISTION Enables negative going inputs All 0s *
*ESE Enables events to generate an SRQ 0
*SRE Enables Summary bits to generate 0
an SRQ
* Indicates parameters that cannot be saved in the unit's nonvolatile memory.
# Indicates parameters that may be blocked by the LOCK command.