I-7088 and M-7088 User Manual, Rev: A1.2 7MH-026-A12
101
2.40. @AADODD
Description:
This command is used to set the status of the PWM output port.
Syntax:
@AADODD[CHKSUM](CR)
@
Delimiter character
AA
The address of the module to be set (00 to FF)
DO
The command to set the status of the PWM output port
DD
A two-digit hexadecimal value, where bit 0 corresponds
to PWM channel 0, and bit 1 corresponds to PWM
channel 1, etc. When the bit is 0, it denotes that the
PWM output port is off, and 1 denotes that the PWM
output port is on.
Response:
Valid Command:
!AA[CHKSUM](CR)
InValid Command:
?AA[CHKSUM](CR)
!
Delimiter character for a valid command
?
Delimiter character for an invalid command
AA
The address of the responding module (00 to FF)
There will be no response if the command syntax is incorrect, there
is a communication error, or there is no module with the specified
address.
