manualshive.com logo in svg

Icom IP1000C, Instruction Manual, Page: 48 / 246

Share
Download
Icom IP1000C Instruction Manual Download Page 48

2

SETTING UP THE IP1000C SYSTEM

2-29

IP100H

Controller connection

Additional Controller Link

IP100H makes a Group Call with the Additional Controller Link (VE-PG3)

192.168.0.3

(Area B)

192.168.0.2

192.168.0.11

(Area A)

Port number (D-TRX1): 21502

Port number (Controller 1): 21500

Sales31

00031

Sales32

00032

Sales group3

00301

VE-PG3

IP1000C

(RoIP Gateway)

[D-TRX1]

Transceiver

CT-24

[USB]

Repeater A

P0

P1

P2

P3

P4

5. Additional controller link with VE-PG3

About the VE-PG3 settings (Bridge mode)

5.   Select the “Mode” item to “NXDN Conventional” in the [Digital Transceiver Model] field.  

(Example: NXDN Conventional) 

[Port Settings] (menu) > [Digital Transceiver 1] (screen) > [Digital Transceiver Model] (field)

6.   Enter the IP address of the repeater in the [Digital Transceiver Connection] field. (Example: 192.168.0.11) 

Enter the TCP Port Number (Example: 41200), or the UDP Port Number. (Example: 41220) 

[Port Settings] (menu) > [Digital Transceiver 1] (screen) > [Digital Transceiver Connection] (field)

 

L

Make sure the using port number for connection do not duplicate with another connection.

After settings in this screen 

are completed, click <Apply>.

Then click <Connect>.

Summary of Contents for IP1000C























































































































































































































































Reviews:

No comments