4
ABOUT THE SETTING SCREEN
4-66
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
55
Firmware Server �����
Enter the IP Address or Host name of the Firmware Server for the
IP100H, up to 63 characters.
L
When the IP1000C is used as its Firmware Server, this entry is not
necessary.
L
Do not install the multiple firmware servers in the system.
56
SYSLOG Host IP Address
Enter the SYSLOG host’s address.
L
The host device must have the SYSLOG server function.
57
SYSLOG Severity ����
Select the log information to send to the SYSLOG host.
(Default:
M
DEBUG
M
INFO
M
NOTICE)
L
Enter a check mark to send the log entries.
58
Read/Write Password ��
Enter a password of up to 16 characters. The password is used when
reading from or writing to the IP100H, or updating the firmware using
the CS-IP100H*.
* CS-IP100H is the cloning software for IP100H, and can be downloaded from
the Icom website.
59
<Apply> ��������
Click to apply the entries.
60
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.
50
51
52
53
54
55
56
57
58
(This is only an example.)
59
60