manualshive.com logo in svg

Icom IP1000C, Instruction Manual, Page: 10 / 246

Share
Download
Icom IP1000C Instruction Manual Download Page 10

1

BEFORE USING THE IP1000C

1-5

2. Feature description

 

■

About the basic connection

The IP1000C enables you to communicate through IP networks by using the IP1000C as a Controller for the 

WLAN transceivers.

 •A wireless access point is required

 •As of June 2023, the IP100H, IP110H, and IP100FS are available for the IP1000C client.

IP1000C

Wireless access point

IP100FS

(Remote communicator)

IP100H

IP110H

IP100H (WLAN transceiver)

IP100H enables you to communicate using the IP1000C and a wireless access point through IP networks.

 •Verify the appropriate system formation according to the environment used, and then the IP communication terminal 

confirmation,wirelessLANsettingsandserversettingsusingtheCS-IP100Harerequired.

 •See the IP100H instruction manual for more details.

IP100FS (Remote communicator)

The IP100FS enables you to remotely communicate with WLAN transceivers connected to your IP1000C  

from a PC through IP networks.

 •

SeetheIP100FShelpfileformoredetails.

CS-IP100H (Cloning software)

The CS-IP100H cloning software is designed to be used for data entry, setting and programming for the 

IP100H from a PC. (You can download the free software from the Icom’s website)

 •Connect the cloning cables correctly according to the CS-IP100H instruction manual uploaded on the Icom’s website. 

Read the instruction carefully and completely.

IP110H (WLAN transceiver)

IP110H enables you to communicate using the IP1000C and a wireless access point through IP networks.

 •Verify the appropriate system formation according to the environment used, and then the IP communication terminal 

confirmation,wirelessLANsettingsandserversettingsusingtheCS-IP110Harerequired.

 •See the IP110H instruction manual for more details.

CS-IP110H (Programming software)

The CS-IP110H programming software is designed to be used for data entry, setting and programming for the 

IP110H from a PC. (You can download the free software from the Icom’s website)

 •Connect the programming cables correctly according to the CS-IP110H instruction manual uploaded on the Icom’s 

website. Read the instruction carefully and completely.

Summary of Contents for IP1000C























































































































































































































































Reviews:

No comments